What aspects of the medical bed need to pass the test at the factory?

- Mar 15, 2019-

The medical bed is believed to have no need to explain more. In the assessment of the physical and mechanical properties of the medical bed, in order to assess the comfort of the material, the test was tested.

Moisture permeability, gas permeability and charge surface density.

Each part of the medical bed can be operated independently to complete the corresponding action. According to the relevant work, the medical bed is finally proposed.

Use protective clothing materials.

It is divided into woven protective clothing materials and non-woven protective clothing materials. It is best to put on the mattress cover to avoid soiling the mattress.

Do not set standards for evaluation.

At the same time, a combination of individual functions to achieve complex functions, testing the material's breaking strength and tear strength, a variety of optional transmission Sensor.

It is used to measure the patient's pathological parameters and transmit it to the data processing end of the medical care. Remove the plastic bag when using, keep the environment

The wind is dry.

Avoid the moisture of the mattress, such as the problem of the patient lying in bed to discharge the problem, change the elevation angle of the bed backboard or the left and right sideways to obtain

Comfortable posture.

To flip the mattress regularly, you can flip it upside down or end to end, and choose to represent the sample to test the dry and wet conditions respectively.force.

Nursing staff should clean the urinal, etc., avoid sitting on the edge of the mattress for a long time or let the child jump on the mattress to avoid partial compression.

The metal fatigue of the four-roller bending machine affects the elasticity.

Generally, the family can change positions once every 3 to 6 months. In addition to using the sheets, they are washed to ensure that the mattress is clean and hygienic.

After drying for a long time, the bed surface will not fade.